Process and Flow products

Pipes

o Standards: ASTM , ASME , API , BS , DIN , AFNOR , JIS , UNI , SIS , GOST
o Materials: Carbon, Low Temp, Stainless, Chrome, Moly, Aluminum, Duplex, Alloy steel, Inconel, Nickel Alloys, Hastelloys, Titanium
o Grades: A53, A106Gr.A/B/C, API5LGr.A/B, 5L, 5LX51 to X60, A333Gr.1 to 6, AISI 304, 304L, 304H, 310, 316, 316L, 316H, 321, 347, 904, 904L A335 Gr. P1 to P91, NACE MR‐01‐75
o CSSeamless:¼”‐24”- A53/A106/API5LGR.B/X42/X52/X60
o CSSeamless/Welded: 4”‐24”(ERW) – A53/API5LGR.B/X46/X52/X60/X65/X70
o CSERW/SAW:24”‐100”- A671/A672/ CC60/CC70
o CSLow Temp:Up to 24” -A333 Gr. 3 & A333 Gr. 6
o Stainless SteelSeamless:1/2‐“12”- A312/A213/A358/ Gr. 304/304L & 316/316L
o Stainless SteelEFW:8”‐56” – F321, X42‐X80
o Duplex/Super DuplexSeamless:1/2‐“12”- ASTM A790
o Duplex/Super DuplexWelded:8”‐24”- ASTM A928
o Special Alloy/ Nickel ‐ Titanium Alloys.Seamless:1/2‐“8”- Nickel 200/Nickel 201/ Monel‐400/Monel‐600
o Special Alloy/ Nickel ‐ Titanium AlloysWelded:8”‐24”-Nickel 200/Nickel 201/ Monel‐400/Monel‐600
o Schedule : 5S to XXS, Odd thicknesses available on request
o Pipe Coatings: Galvanized, Epoxy, Fusion bonded Epoxy, 3 layers PE

Tubing

o Instrument Tubing: Stainless Steel & Nickel Alloys
o Heat Exchanger & Condenser Tubing: Fin Tubes: Stainless Steel & Nickel Alloys
o Studded Tubes: Extended: Stainless Steel & Nickel Alloys
o Surface Tubes: U‐Bent: Stainless Steel & Nickel Alloys
o Tubes & Fin Tubes: Stainless Steel & Nickel Alloys

Fittings & Flanges

o  Standards: ASTM, ASME, API, BS, DIN, AFNOR, JIS, UNI, SIS, GOST
o  Materials: Carbon, Low Temp, Stainless, Chrome, Moly, Aluminum, Duplex, Alloy steel, Inconel, Nickel Alloys, Hastelloys, Titanium
o  Grades: A105, A350, A420, A234, A182, A403, A815, WPB, WPL6, LF2, 316, 316L, 304, 304L, WPHYX42 to X60, F11 to F91, WP11 to WP91, UNS31803, 321, NACE MR‐01‐75

Buttweld Fittings:Elbow, Tee, Reducer, Cap, Cross
o  Type: SMLS, Welded
o  Sizes: ½” to 60”
o  Schedule: 10S to XXS, Odd Thicknesses available on request

Forged Fittings:Elbow, Tee, Coupling, Swage Nipples, Pipe Nipples, Welding Boss, Cross, Plugs
o  Types: Threaded and Socket weld
o  Sizes: ½” to 6”
o  Ends: NPT, BSPT, Socket weld
o  Class: 2000 to 9000 lbs

Branch Fittings:
o  Types: Weldolet, Sockolet, Nippolet,
o  Run Size: Up to 48”
o  Class: 3000 to 9000 lbs
o  Schedule: 10S to XXS

Flanges:
o  Types: Weld Neck, Slip‐On, Socket Weld, Blind, Threaded, Lap Joint,Long Weld Neck, Anchor, Orifice, Spectacle Blind, Swivel.
o  Size: ½” to 60”
o  Class: 150 to 5000 lbs
o  Schedule: 10s to XXS

  • Non Metallic Pipes PVC, CPVC, HDPE, LDPE Pipe & Fittings
  • Oil Field Equipment Hoses and Fittings

Process & Industrial Valves:

  • Ball valves

o  Sizes: ¼” to 48” Cast/Forged Body
o  Class: 800, 2000, 2250, 3000, 5000 PSI (THDD & SW), 150 TO 2500 (FLANGED ENDS)
o  Ends: Threaded, Socket Weld, Flanged & Butt Weld.
o  Port: Regular & Full
o  Construction: Floating Ball, Trunnion Mounted, Side Entry, Top Entry
o  Actuators: Electric, Pneumatic, Hydraulic, Gear Operated.

  • Gate Valves/ Globe Valves/ Check Valves

o  Sizes: ¼” to 2” Forged Body / Cast Body 2” to 36” Cast Body
o  Class: 800, 1500, 3000, (THDD & SW) 150 TO 2500 (FLANGED ENDS)
o  Ends: Threaded, Socket Weld, Flanged, & Butt Weld
o  Port: Reduced or Full
o  Bonnet: Bolted, Welded, Pressure Seal
o  Wedge: Solid or Flexible
o  Gate Types: Slab, Knife, Pipe line API6D Gate,
o  Check Types: Piston, Swing, Ball, Wafer , Lug
o  Globe Types: Flat, Tapered, Plug, or Regulating Disc Angle
o  Actuators: Electric, Pneumatic, Hydraulic, Gear Operated

  • Needle Valves

o  Size: ¼” to 1”
o  Class: 6000, 10000 PSI
o  Ends: Threaded, Socket Weld, Flanged & Butt Weld
o  Port: Reduced or Full
o  Bonnet: Bolted, Welded, Pressure Seal
o  Wedge: Solid or Flexible
o  Gate Types: Slab, Knife, Pipe line API6D Gate,
o  Check Types: Piston, Swing, Ball, Wafer, Lug Globe Types : Flat, Tapered, Plug or Regulating Disc Angle
o  Actuators: Electric, Pneumatic, Hydraulic, Gear Operated

  • Butterfly Valves

o  Sizes: 2” to 48”
o  Class: 150 to 2500
o  Types: Wafer, Lug, Center Flanged, Double Flanged
o  Actuators: Electric, Pneumatic, Hydraulic, Gear Operated
o  Control Valves
o  Sizes: 1” to 12”
o  Class: 150 to 2500
o  Types: Globe, Ball, Double Acting, Spring Return
o  Actuators: Pneumatic, Electric, Hydraulic

  • Safety Relief Valves

o  Sizes: ½” to 8”
o  Class: 150, to 2500
o  Types: Pressure Relief, Temperature Relief, Open Lever, Closed Cap
o  Media: Air, Gas, Liquids
o  Actuators
o  Torques: 150 NM to 250000 NM
o  Types: Pneumatic, Electric, Hydraulic
o  Action: Spring Return, Double Acting, Single Acting

  • Solenoid Valves

o  Sizes: 1/8” to 12”
o  Type: Two Way, Three Way, Four Way
o  Media: Air, Water

  • Pressure Relief Valves
  • Choke valves
  • Control Valves
  • Line Blind Valves
  • Air Valves
  • Double block and bleed valves
  • Plug Valves / Hydrants
  • Fasteners: Hex/Stud Bolts and Nuts

o  Standards: ASTM, ASME, API, BS, DIN, AFNOR, JIS, UNI, SIS, GOST Chrome, Moly, Aluminium, Duplex, Alloy steel, Inconel, Nickel             Alloys, Hastelloys, Titanium
o  Grades: A193, A194, A320 B7, B7M, 2H, 2HM, L7/GR4, L7M, 7, 4, B8, B8M, 8, 8M, B16 NACE MR‐ 01‐75
o  CS‐High & Low Temp: 1/8”‐4”- Bolts
o  Types: Stud Bolts, Anchor Bolts, Turbine Bolting, High Tensile Threaded Rods, Hex Head Bolt, Cap Screws, Nuts, & Washers.
o  Threading: ISO System‐Triangular proof thread, Symmetric Trapezoidal, thread, ISO Pipe Thread. ASA System‐UNC Triangular Profile            thread (Standard Services), UNF Triangular Profile Thread (Special Series), NPT Conical Thread with Triangular Profile ACME                          Trapezoidal profile thread.
o  Coatings: Cadmium , Galvanized, PTFE, XYLAN

  • Steam Traps

o  Materials: Cast Iron, Stainless Steel, Caron Steel, Alloy Steel
o  Sizes: ½” to 2”
o  Types: Thermostatic, Mechanical, Thermodynamic, Drain Orifice
o  Pressure: up to 600 PSI
o  Ends: NPT, BSPT, Flanged RF

  • Strainers

o  Materials: Cast Iron, Ductile Iron, Bronze, Carbon Steel, Low Temp Steel, Chrome Molly, Stainless Steel, Other materials on request.
o  Sizes: ½” to 24”
o  Types: Y‐ Type, Basket, T‐Type, Temporary Strainers
o  Class: 150 to 2500# Mesh : 40, 80, Non Standard mesh available on request
o  Ends: Flat Face, Raised Face, RTJ, Buttweld, Threaded (NPT), Socket Weld.

  • Double ferrule compression type and tube fittings
  • Penstocks
  • Pressure Regulators

o  Material: Cast Iron, Carbon Steel
o  Sizes: 3/8” to 12”
o  Types: Direct Acting / Pilot Regulated
o  Pressure: up to 600 PSI
o  Ends: Flanged, Threaded (NPT)

Invalid Displayed Gallery

Our Products